1. When you are working, please wear good clothes, safety shoes, and put on the helmet, are not allowed to wear gloves operation of CNC machine tools, are not allowed to tie.
2. Before shooting, should check each component of the nc machine tools are in good condition, whether the button can automatically reset. Before starting, the operator should be according to the provisions of the machine tool operation instruction to related parts, and check the oil, oil amount.
3. Clear of obstacles around in the numerical control machine tool, the work space should be large enough.
4. Should turn off the machine power supply before replacing the fuse, must not to contact with the hand motor, transformer, control panel and other places that have requirements of high voltage power supply.
5. Generally does not allow two people at the same time operating machine tools. But a job for two or more people do together, each other will be coordinated action should be paid attention to.
6. Before the computer operation should be familiar with the operating instructions of nc machine tools, CNC lathe boot, shutdown sequence, must be in accordance with the regulations of the machine bed manual operation.
7. The spindle before start start cutting must shut the door, procedures are strictly prohibited in the operation of the normal open the door.
8. After each power on, you must first complete the axis of return reference point operation, and then enter the other operation mode, in order to ensure the correctness of the axis coordinates.
9. The machine in normal operation is not allowed to open the electric cabinet door.
10. The processing procedures have to pass strict inspection before operation.
11. Manual knife, should pay attention to choose suitable feed speed; Manual tool change, the rest is apart from the artifacts to have enough transfer distance not collide.
12. During processing, such as abnormal crisis situation can press the "stop" button, to ensure the safety of person and equipment.
13, are not allowed to use compressed air to clean machine tools, electrical cabinets and NC unit.
